101
Data Processor
Measurement
After Mesurement
•
Pressing the Color Space key
converts the measurement data to other color spaces. (See
P.78 “Selecting the Color Space”)
•
Pressing the Color Space key
changes the screen display. (See P.81 “Screen Display and
Changing the Display”)
•
Measured data is automatically stored.
If you do not wish to store data, press the Delete/Undo key
to delete the latest data.
If you mistakenly delete data you wished to keep, press the Delete/Undo key
again and
the latest deleted data is restored.
Note, however, that if new measurement data replaces the latest deleted data, that data is no
longer restorable, since the new data is stored in its place.
•
Up to 2000 measurement data sets can be stored.
Oldest data is overwritten if this limit is exceeded.
[Printout (example)] [Screen (example)]
*
Press the Print/Paper Feed key anytime you want to print out the data displayed in the LCD.
Page number
Measurement
data number
Illuminant
[Setting conditions]
Select L*a*b* color
space and absolute/
color difference
display
Color difference target
color name
Ｔ００ ［０００２］
Ｌ＊＝ ８９．２０
ａ＊＝ １．７９
ｂ＊＝ １５．０５
ΔＬ＊＝ ＋０．０２
Δａ＊＝ ＋０．０５
Δｂ＊＝ ＋０．０１
ΔＥ＊＝ ０．０６
To Next Page
Loading...
