60
Data Processor
Prepation
[Operating Procedure]
1
Turn the power switch OFF (O) and open the battery
chamber cover on the bottom of the data processor.
2
Insert 4 AA size batteries in accordance with the polar-
ity indications shown in the battery chamber.
3
Close the battery chamber cover.
Measuring Head
See P.23 “Inserting the Batteries” for details on the measuring head.
<Power Supply>
If the connected measuring head and data processor are used, the power is supplied from data proces-
sor to measuring head. The power is not supplied from measuring head to data processor.
Battery chamber cover
Battery chamber cover
To Next Page
Loading...
