74
Data Processor
Preparation
Basic Setting
<Setting the Displayed Color Limit>
This setting selects the color space to be displayed.
See P.79 "Color Space and Changing the Display" and P.80 "Color Space and Color Difference Set-
ting" for details on the setting conditions.
[Operating Procedure]
1
Press the Index Set key
Index Set
０
while in the measurement
screen.
• The item setting screen will appear.
2
Select “DISP. LIMIT” using the key.
3
Press the Measure/Enter key
.
• The displayed color limit screen appears.
4
Select a color space using the key.
5
Press the Measure/Enter key
to turn ON and OFF
each color space.
• The color space being displayed in the measurement screen
cannot be turned OFF.
See P.75 “CMC Parameter Setting” for details on CMC pa-
rameter setting.
• The page can be changed by pressing the key.
• The page can be changed by keeping the key pressed.
• This may be three pages long if a user index is registered in
connected measuring head.
(See P.127 “User Index”.)
6
Once the settings are complete, press the Escape key
Esc
to return to the measurement screen .
Displayed color limit
screen (Page 1 of 2)
Displayed color limit
screen (Page 2 of 2)
ＤＩＳＰ． ＬＩＭＩＴ
Ｐ００
C
P
［０００１］
ＤＩＳＰ． ＬＩＭＩＴ
Ｐ００
C
P
［０００１］
To Next Page
Loading...
