11
White Calibration Plate
CR-A43 (for CR-400 Head)
CR-A44 (for CR-410 Head)
Used during white calibration.
Back side of the cover lists calibration data.
Protective Cap
CR-A72 (for CR-400 Head)
CR-A104 (for CR-410 Head)
Attaches to the tip of the light projection tube of the
measuring head to protect the optics.
Roll Paper - 1 roll
(for data processor)
Thermal paper for the printer.
RS-232C Cable (for connecting the Head to the DP)
CR-A101 (for data processor)
Used to connect the measuring head to the data pro-
cessor. (for this instrument only 13-pin specification,
1.3m long)
AC Adapter
AC-A17
Supplies power from an AC outlet to the instrument.
Input: 120V 50-60Hz 0.4A (for N.America)
Input: 230V 50-60Hz 0.4A (for worldwide except
N.America)
Output: Voltage 5Vdc Current 2.8A (max.)
Wrist Strap
CR-A73 (for measuring head)
Attaches to the measuring head.
AAA Size Battery (x4)
(for measuring head)
AA Size Battery (x4)
(for data processor)
Before Use
Standard accessories are available with this instrument.
In the text, “Head” indicates the Measuring Head and “DP” indicates the Data Processor.
Standard Accessories
To Next Page
Loading...
