17
<Data Processor>
1. Power switch : Turns ON and OFF the power .
2. RS-232C terminal : Connect the RS-232C cable when transmitting data back and forth to
the data processor or a computer.
3. AC adapter terminal : Connect the connector plug for the AC Adapter (AC-A17) here when
using the adapter.
4.
Roll paper storage chamber
: This is where the roll paper (thermal paper) is stored.
5. Printer : Prints data on the roller paper (thermal paper).
6. LCD : Displays measurement data and setting items.
7. Display contrast : Turning the dial adjusts the contrast of the display to the most appro-
priate level.
8. Battery chamber cover : Open and close when replacing batteries. When inserting the 4 AA size
batteries, make sure their polarity orientation is as shown.
9. Shoulder strap attachment : The optional shoulder strap is attached.
10. Buzzer : Buzzer sounds.
①
②③
④
⑤
⑥
⑦
⑧
⑨
⑩
To Next Page
Loading...
