126
Data Processor
Functions
Optional Setting
<Transfer stored data>
It is possible to transfer data stored in the measuring head to the data processor.
Import actually moves the data, and does not simply copy it.
Selecting multi-calibration in P.115 displays the [multi-calibration] selection screen.
1
Move the cursor using the key and select the page
to import.
2
Press the Measure/Enter key
.
• After the processing screen, import is complete, and the dis-
play returns to the measurement screen.
• If the selected page contains data, newer data is registered af-
ter the existing data.
• Import will not be performed if there are more than 2000 sets
of data.
To Next Page
Loading...
