Ｔ００ ［０００１］
ＰＡＳＳ／ＦＡＩＬ
ＰＡＳＳ
Ｐ００
C
P
［０００１］
<Screen Display and Changing the Display>
The basic screen layout is shown below.
The measurement results can be changed as needed.
[Operating Procedure]
1
Press the Change Display key
５
ＪＫＬ
while in the measurement screen to change
the display for your use.
• The display changes every time the key is pressed.
• The display for “color difference graph” and “judgment” are example screens where no color
difference tolerance has been set. To set the color difference tolerance, see P.116 “Setting the
Color Difference Tolerance”
• Depending on the color space, display change may be restricted. (See P.79 “Color Space and
Changing the Display”.)
[Setting conditions]
• The color difference target
color is set.
• L*a*b* is selected by press-
ing the Color Space key
To Next Page
Loading...
