22
Measuring Head 1
Preparation
Function Guide
The Measuring Head has the following functions available depending on how it is used.
1) Functions surrounded by in the following table can be used with the Measuring Head alone.
(See P.21 "Chapter 1 Measuring Head I".)
2) Other functions can be set using the Data Processor when using the Measuring Head separately
from the Data Processor.
• See P.58 "Data Processor: Function Guide" for details on functions available when connected to the
Data Processor.
See P.35 "Measurement" for details on color measurement and color difference measurement.
Index Function Reference page
Initial setting Initial setting Initialization
56
Language mode Language selection
Calibration White calibration Entry of calibration values
36
Display Change display Absolute values/Color difference display
30
Change display
Absolute value display
54
Color difference display
Pass/Caution/Fail display
55
Color space Color space selection
31
Color difference Color difference Target color setting (measurement value entry)
40
target colors target colors Target color selection
46
Target color setting (value entry)
Target color character string
55
Delete one target color/all target colors
Processing stored data Data list Selection 1 data retrieval
48
Deleting/Undoing the latest data
Basic settings Backlight
Setting
29
PC mode
49
Average measurement
54
Data protection
Illuminant
Color space limit Setting
56
CMC parameter
Option setting Clock
Data transfer
56
Multi-calibration
54
Other settings LCD contrast
Setting 29
Baud rate setting
• (2) above can be set using the optional CR-400 utility software CR-S4w and the Color data software
ChromaMagic CR-S3w as well. See the software manuals for details.
• User index displays can also be registered from the optional software. (See page 48.)
To Next Page
Loading...
