Minolta CR-400 - Box Tolerance and ∆E

123
Data Processor Functions
Selecting the limit value in P.115 displays the [limit value] selection screen.
[Operating Procedure]
1
Use the key to select a color difference target
color.
2
Press the Measure/Enter key

.
• The tolerance type screen appears.
3
Select the “BOX & ∆E*” as the tolerance type.
4
Press the Measure/Enter key

.
• The limit value setting screen will appear.
• If color difference tolerance and ∆E are already set, go to step
6 as the set color difference tolerance data is displayed.

5,7
1,3,5,7
2,4,6,8
［ＴＯＬＥＲＡＮＣＥ］ １／１ 
◎ＴＡＲＧＥＴ 
Ｔ０３
Ｔ０２
Ｔ０１




Ｐ００ 
C  P 
［０００１］
［ＴＯＬＥＲＡＮＣＥ］
◎ＴＯＬＥＲＡＮＣＥ ＴＹＰＥ

ＥＬＬＩＰＴＩＣＡＬ
ＢＯＸ
ΔE＊
ＢＯＸ ＆ ΔE＊


Ｐ００ Ｃ P ［０００１］
［ＴＯＬＥＲＡＮＣＥ］
◎ＴＯＬＥＲＡＮＣＥ

Ａ Ｂ
＋ ０．００ ＋ ０．００
− ０．００ − ０．００
Ｃ Ｄ
＋ ０．００ ０．００ 
− ０．００

Ｐ００ Ｃ ［０００１］
P


ΔL＊
Δa＊
Δb＊
ΔE＊
Box tolerance and ∆E
This judges both box tolerance and ∆E.
Selection screen
Tolerance type screen
Setting screen