122
Data Processor
Functions
Optional Setting
5
Set the ∆E using the key and the numeric pad.
Input ranges for the set values
(Tolerance) Y: 0.01 to 99.99, xy: 0.0001 to 0.9999, other than Yxy: 0.05 to 80.00
(Offset) -5.00 to +5.00 (should be within to tolerance)
(Rotation) -45 to +45
(Warning level) 10 to 100%
6
Press the Measure/Enter key
.
• The warning level setting screen appears.
7
Set the warning level using the key and the nu-
meric pad.
8
Press the Measure/Enter key
.
• Once ∆E setting is complete, the measurement screen appears.
• Measurement points within the color difference tolerance are
plotted as O, warning level points are plotted as ∆, and points
out of the color difference tolerance are plotted as X.
［ＴＯＬＥＲＡＮＣＥ］
◎ＷＡＲＮＩＮＧ ＬＥＶＥＬ
１００％
Ｐ００
C
P
［０００１］
Ｔ０２ ［０００１］
ΔＬ＊ Δｂ＊
０．０２ ０．０１
Ｐ００
C
P
［０００１］
Setting screen
Measurement result
To Next Page
Loading...
