2
Chapter 1 Measuring Head 1 (P.21- )
Chapter 2 Measuring Head 2 (P.53- )
Chapter 3 Data Processor (P.57- )
When using the measuring head alone.
When using the measuring head separately from the data processor after setting.
• The measuring head cannot be set by itself, but functions which run by setting the head using the
optional CR-400 utility software CR-S4w or the Color data software ChromaMagic CR-S3w are
described.
When using the measuring head and the data processor together.
Introduction
Thank you for buying a Minolta product. This instrument is a high-precision, light-weight Chroma
Meter developed for Absolute Measurement and Difference Measurement in a wide range of fields.
Measurement can be made in conjunction with a multi-functional data processor or with the Measur-
ing Head alone.
Layout of This Manual
• This manual describes the CR-400 and CR-410. The CR-400 is used for illustrations, and any
differences have been pointed out clearly so the manual may be used equally for both models.
• The manual is divided into two sections covering the Measuring Head and one section on the data
processor. See following chapters for your use.
To Next Page
Loading...
