73
Data Processor
Preparation
[Operating Procedure]
1
Press the Index Set key
Index Set
０
while in the measurement
screen.
• The index set screen is displayed.
2
Select the item to set using the key.
3
Press the Measure/Enter key
to change each set-
ting.
• Pressing the Measure/Enter key changes the setting value in
the table on P.72 for each setting.
• See P.74 “Setting the Displayed Color Limit” for details on the
displayed color limit.
• The page can be changed by pressing the key.
• The page can be changed by keeping the key pressed.
• Pressing the Measure/Enter key in remote mode changes to
the PC connection mode. (See P.129 “Changing to Remote
Mode”.)
4
Once the basic settings are complete, press the Es-
cape key
Esc
to return to the measurement screen.
(Page 1 of 2)
(Page 2 of 2)
To Next Page
Loading...
