118
Data Processor
Functions
Optional Setting
Input ranges for the set values
(Tolerance) Y: 0.01 to 99.99, xy: 0.0001 to 0.9999, other than Yxy: 0.05 to 80.00
(Offset) -5.00 to +5.00 (should be within to tolerance)
(Rotation) -45 to +45
(Warning level) 10 to 100%
If the rotation is set,the graph showing tolerance range is not made.
6
Press the Measure/Enter key
.
• The gradient/warning level setting screen is displayed.
7
Set the rotation and the warning level using the
key and the numeric pad.
8
Press the Measure/Enter key
.
• Once the elliptical tolerance setting is complete, the measure-
ment screen appears.
• Measurement points within the color difference tolerance are
plotted as O, warning level points are plotted as ∆, and points
out of the color difference tolerance are plotted as X.
［ＴＯＬＥＲＡＮＣＥ］
◎ＲＯＴＡＴＩＯＮ
Δa＊−Δb＊＋ ０．０
Δa＊−ΔL＊＋ ０．０
Δb＊−ΔL＊＋ ０．０
◎ＷＡＲＮＩＮＧ ＬＥＶＥＬ
１００％
5
Set the color difference tolerance and the offset using the key and the nu-
meric pad.
Setting screen
Measurement result
(example)
Ｔ０２ ［０００１］
ΔＬ＊ Δｂ＊
０．０２ ０．０１
Ｐ００
C
P
［０００１］
Tolerance of ∆L*
Tolerance of ∆a*
Offset
(∆a*, ∆b*)
Rotation
(∆a*, ∆b*)
Tolerance of ∆b*
Target
value
To Next Page
Loading...
