20
1 3
5 2 6
4
[As input keys]
1. Numeric pad ~
Index Set
０
• Numeric input is used for white calibration values, selected calibration,
color difference target color data, color difference restriction, the clock,
the timer, and the CMC parameter input screen.
• Letter input is used in the selected calibration channel name and color
difference target color name input screens.
2. Target Color key
Target
Symbol
• Enters the following symbols at the letter or numeric input above . ('sp'
= space.)
Upper case Latin letters Small case Latin letters
sp ! ” # $ % & ’ ( ) * + ,
-
. / : ; < = > ? @ [ ? ] ^ _
` { | }
Numbers
sp . +
-
3. Up/Down key • Changes input letter type.
Pressing the cursor key down: upper case Latin letters → numbers →
lower case Latin letters → upper case Latin letters, ....
Pressing the cursor key up: upper case Latin letters → lower case Latin
letters → numbers → upper case Latin letters, ....
• Moves the cursor when it can move up or down in the following screen:
white calibration values, user calibration, color difference target color
data, color difference tolerance input, date & time, and end time of the
timer
• Adds ±1 to values.
4. Left/Right key • Moves the cursor when it can move left or right.
5. Escape key
Esc
• Cancels numeric or letter input.
6. Measure/Enter key
To Next Page
Loading...
