83
Data Processor
Preparation
Color difference graph
The display is as shown in the figure at right when no color difference
tolerance is set.
Setting the color difference tolerance (see P.116 “Setting the Color
Difference Tolerance”) makes the following color difference graph
display is displayed.
1) ∆L* axis
2) ∆a* axis
3) ∆b* axis
4) Measurement point
5) Color difference target color measurement point
6) Displaying a box-type color difference tolerance
7) Scale for each axis (automatically changes.)
8) Displaying a elliptical color difference tolerance
O PASS: This is displayed when the value is within
the color difference tolerance.
∆ WARN: This is displayed when value is within the
color difference tolerance, but exceeds the
warning level.
X FAIL: This is displayed when the value exceeds
the color difference tolerance.
Box-type color difference
tolerance setting
[Setting conditions]
• The color difference target color
is set.
• L*a*b* is selected by pressing the
Color Space key
To Next Page
Loading...
