92
Data Processor
Measurement
Color Difference Measurement
5
Place the measuring head vertically above the color
difference target color specimen.
6
Press the Measure/Enter key
(or the measure-
ment button on the measuring head) after making sure
the ready lamp is ON.
• A new color difference target color is set.
• When not setting a new color difference target color, measur-
ing overwrites the color difference target color data.
Do not move the measuring head during measurement.
7
Once measurement is complete, set the color differ-
ence target color name using the key and the nu-
meric pad.
Setting screen
Setting the color
difference target color
name (example)
(How to set the color difference target color name)
1) Select input mode using the key.
• Pressing the key changes the input modes in the following order: upper case Latin
letters → numbers → lower case Latin letters.
2) Move the cursor using the key and input the color difference target color name using
the numeric pad.
• The name is up to 9 characters (see P.20 “As input keys” for details.)
8
Once settings are complete, press the Measure/Enter
key
.
• Settings are complete, complete sound beeps and the display
returns to the measurement screen.
Settings are now finished. Other color difference target color numbers
can be set by repeating the above procedure.
Measurement screen
P
O
W
E
R
［ＴＡＲＧＥＴ］
◎ＴＡＲＧＥＴ ＶＡＬＵＥ
Ｌ＊＝
ａ＊＝＋１５．３２
ｂ＊＝＋１０．２１
◎ＴＡＲＧＥＴ ＮＡＭＥ Ａ
Ｔ０３
Ｐ００
C
P
［０００１］
To Next Page
Loading...
