Minolta Di350 - INITIAL MODE; Initial Mode Access and Screens

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
S-42
•
Initial mode is used to initialize the various service functions.
<Setting Procedure>
1. Enter the Initial mode by pressing the following keys in this order:
2. Select the particular Initial mode function to be set.
3. Make the necessary settings by following the instructions given sequentially on the
screen.
✽
The function selected is highlighted.
<Exiting the Mode>
•
Touch [Exit] on the Initial mode screen to go back to the Basic screen.
8 INITIAL MODE
8-1. Initial Mode Menu Screen
8-2. Initial Mode Function Setting Procedure
Warm Restart
Switch ON
➡
Enter “3” from the 10-Key Pad when “.” appears at the center on the
left side of the screen while the start-up screen is being displayed.
1167S013CB