FrameMaker Ver.5.5E(PC) Di350 GENERAL, MECHANICAL/ELECTRICAL
98.12.18
M-15
1171SBM1100A
•
Light reflected from the original passes through three mirrors and a lens to form a
reduced image on the CCD Sensor as the Scanner is moved by the Scanner Motor. The
CCD sensor converts the light pattern (image data) into an electrical image signal.
•
The electrical image signal is then output to the MFB Board.
11 IR SECTION
1. BCR Board (BCR)
2. Original Size Detecting Sensor 5 (UN8)
3. Original Cover Detecting Sensor (PC14)
4. Original Size Detecting Sensor 4 (UN7)
5. Exposure Lamp (LA2)
6. Original Size Detecting Sensor 6 (UN9)
7. Scanner Motor (M5)
8. HGB Board (HGB)
9. Original Size Detecting Sensor 1 (UN4)
10. Original Size Detecting Sensor 2 (UN5)
11. Original Size Detecting Sensor 3 (UN6)
12. Scanner Home Position Sensor 1
(PC12)
13. Size Reset Switch (S5)
14. CCD Board (CCD)
15. Lens
16. Scanner
17. 1st Mirror
18. Scanner Home Position Sensor 2
(PC13)
19. 2nd/3rd Mirrors Carriage
20. Inverter Board (INV)
1
2
5
6
7
8
9
10
11
12
13
14
15
16
18
19
20
1167M110AD
4
3
17
To Next Page
Loading...
