Minolta Di350 - 4 Miscellaneous; Installation of the Key Counter Socket (Option

FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09
D-53
4 MISCELLANEOUS
4-1. INSTALLATION OF THE KEY COUNTER SOCKET (OPTION)
1. Remove the Front Cover.
2. Remove the knockout from the Front Upper Cover.
3. Using two screws, secure the Counter Mounting
Bracket.
1167D022AB
4. Route the harness of the Key Counter as shown.
1167D025AB
5. Connect the Key Counter Socket connector.
6. Using one screw and one screw and nut, secure
the counter socket.
1167D023AB
7. Using two screws, secure the Key Counter Cover.
NOTE
When the Key Counter Socket is mounted, set to “ON
”
the “Key Counter
”
available from the Security mode.
1167D024AB