FrameMaker Ver.5.5E(PC) Di350 GENERAL, MECHANICAL/ELECTRICAL
98.12.18
M-11
1171SBM0701A
•
Drive from the I/C Motor is transmitted via a gear train to the PC Drum and Hopper.
1171SBM0702A
•
When the Start key is pressed or the Side Cover is opened and closed, the copier deter-
mines whether the I/C is new or one which has been used previously.
•
The copier monitors the I/C life by storing in memory the period of time during which the
PC Drum has turned. The data is cleared when a new I/C is installed in the copier.
7-1. I/C Drive Mechanism
Electrical Component Control Signal ON OFF
M1 PJ16A-3 L H
7-2. Identification and Life of I/C
1171M004AA
PC Drum Drive Gear
Hopper Drive Gear
I/C Motor (M1)
To Next Page
Loading...
