FrameMaker Ver.5.5E(PC) Di350 GENERAL, MECHANICAL/ELECTRICAL
98.12.18
M-36
1171SBM1404A
•
The Paper Size Detecting Board detects the length of the paper (FD).
•
A lever is connected to the Trailing Edge Stop of the cassette and, as the stop is slid to
the size of the paper loaded in the cassette, the lever is moved to turn ON and OFF the
size detecting switches mounted on the copier side.
•
The control panel settings are necessary for any paper size other than the following.
14-4. MP Cassette Paper Size Detection
Paper Size Detecting Switches (PWB-I)
Paper Size
1234
ON OFF OFF OFF A3L, 11”×17”L
OFF OFF OFF OFF B4L, 8-1/2”×14”L
OFF ON ON ON A4L
ON ON ON ON B5L, 8-1/2”×11”L
ON ON OFF OFF A4C/A5L
ON OFF OFF ON B5C
OFF ON OFF OFF A5C
ON ON ON OFF 8-1/2”×11”C
Electrical Component Control Signal ON OFF
PWB-I (1) PJ14A-1B L H
PWB-I (2) PJ14A-2B L H
PWB-I (3) PJ14A-3B L H
PWB-I (4) PJ14A-4B L H
Trailing Edge Stop
Paper Size Detecting Board (PWB-I)
12 34
1167M060AC
To Next Page
Loading...
