FrameMaker Ver.5.5E(PC) Di350 GENERAL, MECHANICAL/ELECTRICAL
98.12.18
M-29
1171SBM1304A
•
Toner is replenished from the Sub Hopper to the Developing Unit by turning the Sub
Hopper Toner Replenishing Motor for the period of time controlled by the ATDC output
voltage (T/C).
13-4. Sub Hopper Toner Replenishing Mechanism
Electrical Component Control Signal ON OFF
M7 PJ11A-8A DC24V L
1171M013AC
Sub Hopper
Sub Hopper Toner Replenishing Motor (M7)
To Next Page
Loading...
