FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09
D-25
2-6. DEVELOPING SECTION
(1) Removal of the Imaging Cartridge
1. Open the Side Cover.
1171D021AA
2. Holding onto the green handles, slide the Imaging
Cartridge part of the way out.
3. Then grasp the handle on top of the cartridge and
pull the cartridge out.
NOTE
When installing the Imaging Cartridge, push it all the
way into the machine.
If the cartridge is not properly installed, the PC Drum
protective shutter of the cartridge may not be opened
or may even be damaged.
1171D023AA
To Next Page
Loading...
