Minolta Di350 - Operating Sequence

FrameMaker Ver.5.5E(PC) Di350 GENERAL, MECHANICAL/ELECTRICAL
98.12.18
M-5
1171SBM0400A
4 OPERATING SEQUENCE
Approx.
400 msec.
OFF
Image transfer output
Approx.
15 min.
OFF
Developing bias
(DC)
A The power cord is plugged into the power outlet.
The Power Supply Unit outputs DC24V for the Dehumidifying Heater (option).
ON
B The Power Switch is turned ON.
DC voltage output
ON
Control panel display
ON
Approx.
560 msec.
ON
Fusing Roller Heater Lamp
C The warming-up cycle is completed.
Main Motor
ON
Power Unit Cooling Fan Motor turns
at full speed.
Approx. 20 sec.
Predrive stops
OFF
Power Unit Cooling Fan Motor turns
at half speed.
Developing bias (DC)
ON
Approx.
100 msec.
ON
I/C Motor
Image transfer output: - voltage
ON
Approx.
700 msec.
ON
Image transfer output:
+ voltage
Approx.
400 msec.
ON
Image transfer output:
- voltage
ON
Image transfer output:
+ voltage
Approx.
400 msec.
Approx.
400 msec.
ON
Image transfer output:
- voltage
T/C ratio is checked for abnormality
for approx. 28 sec.
Normal T/C
Abnormal T/C: approx. 31 sec.
OFF.
I/C Motor