Minolta Di350 - Fusing Section; Removal of the Fusing Unit; Removal of the Fusing Roller Heater Lamp, Fusing Right Roller, Fusing Left Roller, Fusing Roller Thermistor, Fusing Roller Thermostat, and Fusing Roller Heater Lamp Fuse

FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09
D-26
2-7. FUSING SECTION
(1) Removal of the Fusing Unit
(2) Removal of the Fusing Roller Heater Lamp, Fusing Right Roller, Fusing Left
Roller, Fusing Roller Thermistor, Fusing Roller Thermostat, and Fusing Roller
Heater Lamp Fuse
1. Open the Side Cover.
1171D021AA
2. Remove the Front Cover.
3. Unplug one connector at the front.
1167D020AB
4. Open the Exit Cover and unplug two connectors in
the rear.
5. Close the Exit Cover and remove two screws and
the Fusing Unit.
1167D021AB
1. Open the Exit Cover.
2. Remove one screw and the Fusing Front Cover.
1171D036AA