Minolta Di350 - Paper Take-Up Mechanism; Manual Bypass Tray

FrameMaker Ver.5.5E(PC) Di350 GENERAL, MECHANICAL/ELECTRICAL
98.12.18
M-37
1171SBM1405A
•
Drive from the Main Motor is transmitted to the Paper Take-Up Clutch (spring clutch) and,
by energizing the Paper Take-Up Solenoid, the Paper Take-Up Roll is turned.
•
The paper separating mechanism employs a Paper Separator Pad.
1171SBM1406A
1. Construction of the Manual Bypass Tray
•
Drive from the Main Motor is transmitted to the Manual Paper Feed Take-Up Clutch and,
by energizing this clutch, the Manual Feed Paper Take-Up Roll is turned.
14-5. Paper Take-Up Mechanism
14-6. Manual Bypass Tray
Electrical Component Control Signal ON OFF
M2 PJ16A-1 L H
SL1 PJ13A-13B L H
CL3 PJ4A-9A L H
1167M054AB1167M038AB
Main Motor (M2)
Paper Take-Up Roll
Paper Take-Up Clutch
Paper Take-Up Sole-
noid (SL1)
Paper Separator
Pad
1167M067AC
Main Motor (M2)
Manual Feed Paper Take-Up Roll
Manual Feed Paper Take-Up Sensor (PC8)
Manual Bypass Tray
Manual Paper Feed Take-Up Clutch (CL3)