FrameMaker Ver.5.5E(PC) Di350 TROUBLESHOOTING
98.12.09
T-12
•
The following are the types of misfeed detection and detection timings for different mis-
feed locations.
NOTE
For misfeed detection types and detection timings of options, see the relevant option ser-
vice manual.
<Copier Take-Up Misfeed>
<Manual Bypass Take-Up Misfeed>
3-4. Types of Misfeed Detection and Detection Timings
Type Detection Timing
Timer Value
T (sec.)
Paper take-up fail-
ure detection
•
1st Drawer paper take-up:
Synchronizing Roller Sensor PC2 is not unblocked (H)
even after the lapse of T sec. after Paper Take-Up
Solenoid SL1 has been energized for the second
paper take-up retry sequence.
0.92
•
2nd Drawer paper take-up:
PC2 is not unblocked (H) even after the lapse of T sec.
after SL1 has been energized for the first paper take-
up retry sequence.
1.63
•
1st/2nd Drawer paper take-up:
PC2 is unblocked (H) within T sec. after SL1 has been
energized.
0.20
Type Detection Timing
Timer Value
T (sec.)
Bypass paper
take-up failure
detection
PC2 is not unblocked (H) even after T sec. after Man-
ual Feed Paper Take-Up Clutch CL3 has been ener-
gized.
0.64
PC2 is unblocked (H) within T sec. after CL3 has been
energized.
0.20
Paper left Manual Feed Paper Take-Up Sensor PC8 is blocked
(L) when the Power Switch is turned ON, CPU is reset,
or cover is opened and closed.
———
To Next Page
Loading...
