FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09
D-22
15. Peel off the tape from the pulleys at the front and rear.
16. Mount the Scanner.
17. Mount the Original Size Detection Sensor.
18. Reinstall the Left IR Cover.
19. Reinstall the Original Glass and ADF Glass Assy.
20. Perform the Focus-Positioning of the Scanner and 2nd/3rd Mirrors Carriage.
(For details, see ADJUSTMENT.)
NOTE
Whenever the Scanner Drive Cables have been removed, be sure to make the following
adjustment: CD of Zoom Adjust (IR).
14. Fit the hook end of the cable into the groove in the
Cable Guide and hook the spring.
1167D077AA
Cable Guide
To Next Page
Loading...
