FrameMaker Ver.5.5E(PC) Di350 DIS/REASSEMBLY, ADJUSTMENT
98.12.09
D-28
12. Snap off one E-ring and remove the front Misfeed
Clearing Lever Assy and bearing.
13. Remove the Fusing Right Roller.
1171D044AA
14. Snap off two retaining rings.
15. Remove one gear and two bushings.
16. Remove the Fusing Left Roller.
1171D045AA
NOTE
When the Fusing Left Roller is removed, it can cause
the spring to come off the Separator Finger. After the
Fusing Left Roller has later been reinstalled, be sure to
hook the spring onto the Separator Finger.
1171D046AA
17. Remove one screw and the Fusing Roller Ther-
mistor.
18. Remove two screws and the Fusing Roller Heater
Lamp Fuse.
19. Remove two screws and the Fusing Roller Ther-
mostat.
1171D047AA
To Next Page
Loading...
