FrameMaker Ver.5.5E(PC) Di350 TROUBLESHOOTING
98.12.09
T-22
<Paper Take-Up/Transport Misfeed (PF-106) Troubleshooting Procedure>
(5) Paper Take-Up/Transport Misfeed (PF-106)
Relevant Electrical Parts
Take-Up Clutch 1 P1CL
Take-Up Clutch 2 P2CL
Paper Empty Sensor 1 PPS1
Paper Standby Position Sensor S1
Separator Clutch BCL
Registration Clutch RCL
Registration Sensor RSEN
Synchronizing Roller Sensor PC2
Transport Clutch CL2
Take-Up Sensor S3
LCC Main Board PWB-A: PF-106
Cassette Main Board PWB-A: PF-108/PF-110
Cassette Main Board PWB-A
Master Board PWB-A
Symptom Step Check Item Result Action
•
Paper is not
taken up at all.
•
Paper is at a
stop before the
Paper Feed/
Separator Rolls.
1
Does the paper being used
meet the product specifica-
tions?
NO
Instruct the user to use the
paper that meets product
specifications.
2
Is the paper curled, wavy, or
damp?
YES
Change the paper. Instruct the
user on the storage of paper.
3 Is the Paper Take-Up Roll
deformed, worn, or dirty
with paper dust?
YES
Clean or change the Paper
Take-Up Rol l.
1171C12TAA
To Next Page
Loading...
