FrameMaker Ver.5.5E(PC) Di350 GENERAL, MECHANICAL/ELECTRICAL
98.12.18
M-3
10. Paper Separation
•
The PC Drum Separator Fingers remove paper from the surface of the PC Drum.
11. Duplex Unit
•
Makes 2-sided copies.
12. Cleaning
•
The Cleaning Blade scrapes residual toner off the surface of the PC Drum and the toner
is recycled back to the Developing Unit.
13. Erase
•
The PC Drum is exposed to light, which effectively removes any residual charge from
the drum surface.
14. Fusing
•
Heat and pressure applied by the Right and Left Fusing Rollers fuse toner on the paper.
15. Paper Exit
•
Feeds paper out of the copier.
To Next Page
Loading...
