Minolta Di350 - Page 99

FrameMaker Ver.5.5(PC) Di350 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.11.25
S-21
Tech. Rep. Mode Tech. Rep. Choice
<Scan-through ADF>
<IR-Erasure Width>
Touch Panel
Display
Setting (The default is ).
Registration Adjust registration in the main and sub scanning directions of the ADF.
Zoom Adjust Adjust the scanning zoom ratio in the main and sub scanning direc-
tions of the ADF.
Touch Panel
Display
Setting (The default is ).
IR-Erasure Width Set the forced erasure width along the four edges of the paper to
erase shadows which are otherwise produced by the Original Scales.
Highlighted
-127 dot.................... .................+127 dot
Smaller Greater
0
0.990.................... .................. 1.010
Smaller Greater
1.000
Highlighted
...................................................3mm
Smaller Greater
0mm