Mio 269+ - Connecting to AC Power and Charging the Battery

1.2 Connecting to AC Power and Charging the
Battery
Fully charge the battery before starting to use your device for the first time.
NOTE: Depending on your region of purchase, the converter may not look exactly the
same as the picture shown.
1. Plug the converter to the AC adapter.
2. Connect the DC end of the AC adapter to the bottom of your device. ()
3. Plug the other end of the AC adapter into a wall outlet. ()
Converte
r
Charge Indicato
r
The charge indicator glows amber when charging is in progress. Do not
disconnect your device from AC power until the battery is fully charged, as
indicated by the amber indicator turning into green. This will take a couple of
hours.
NOTE: For optimal performance of the lithium battery, take note of the following:
 Do not charge the battery where the temperature is high (e.g. in direct sunlight).
 There is no need to fully discharge the battery before charging. You can charge the
battery before it is discharged.
 If you will not use the product for a long period of time, be sure to fully charge the battery
at least once every two weeks. Over discharge of the battery can affect the charging
performance.
4