Mio 269+ - Using Metrology Mode

8.4 Using Metrology Mode
Metrology mode allows you to convert measures from one unit to another.
1. Tap
Tools  Calculator to start Calculator.
2. Tap the
button on the calculator screen to switch to Metrology mode.
3. Tap the measure button on the metrology screen to display a scroll list of
measures and select the desired measure from the list.
4. Tap the down arrow next to the input field to display a list of units and select
the unit to convert from. When a unit is selected, the abbreviation of the unit
will be displayed on the upper left corner of the input field.
Unit indicato
r
Input field
Unit scroll lis
t
67