RDS-32 FUNCTIONALITY
19
If the dose rate warning is muted from the Main display, the warning audible, vibration and
LED indication will switch off. The display will still continuously show the warning symbol in
the left upper corner and the display will blink.
During a dose rate warning the
Main display will blink, showing
the measured dose rate. The
W symbol remains constantly
on screen.
During a dose rate alarm the
Main display will blink, showing
the measured dose rate. The AL
symbol remains constantly on
screen.
The configuration software offers additional control over the alarm methods. In the
software the alarm method can be set freely to any single mode or a combination of
audio/visual/vibration. For example, applying the vibration mode only can be useful for
tactical situations.
Use the dual alarm mode to set a dose rate warning level to alert the user to a rising dose
rate field which requires attention. The user is then alerted to the unusual condition and
the meter will next alert the user if the alarm level is exceeded.
The configuration software offers additional control over the alarm methods. In the
software the alarm method can be set freely to any single mode or a combination of
audio/visual/vibration. For example, applying the vibration mode only can be useful for
To Next Page
Loading...
