4
3300 ICP Technician’s Handbook
CAUTION: Failure to follow all instructions may result in
improper equipment operation and/or risk of electrical shock.
Refer to “3300 Safety Instructions” for complete safety infor-
mation.
CAUTION: To prevent ESD damage to the equipment: (1)
Ensure that the system is grounded before you install a card.
(2) Whenever you handle cards, wear an anti-static strap
(attached to the cabinet). (3) When removing cards from the
cabinet, immediately place them in an anti-static bag.
CAUTION: All installation, field replacement, and servicing
procedures must be carried out by service personnel who
have successfully completed the Mitel Installation and main-
tenance training course.
CAUTION: Hardware is sensitive to shock and vibration; han-
dle hardware with care.
CAUTION: Provide a permanent ground for all controllers and
units through the ground connection on each cabinet.
CAUTION: BRI Interface is not available in Taiwan. Use of this
interface is prohibited.
CAUTION: When sold in Taiwan, the MXe Controller supports
ISDN T1/E1 and Leased Line T1. However, it does not support
Leased Line E1 and ISDN BRI in Taiwan.
Note: The ground symbol within a circle identifies the terminal to be
connected to an external protective conductor. Connect this terminal to
earth ground before you make any other connections to the equipment.
To Next Page