141
Maintenance
Restoring Default Addresses on MXe Server
1. Launch Microsoft Internet Explorer and go to the following URL:
https:/192.168.1.8/server-manager.
2. At the login page, enter
Username: admin
Password: (enter the Linux admin password that you set through the
Server Console). The Managed Application Server Manager
application opens.
3. Under Applications, click Mitel Communications Director. The
Mitel Communications Director screen is displayed.
4. Click Modify.
5. Click Restore Defaults at the bottom of the IP Addresses screen.
After you press this button a screen with the default IP address values
is displayed.
6. Enter a valid IP address on the local network in the Layer (L2) IP field.
The address MUST be different than the APC Gateway IP address.
7. Click Save to apply the addresses. A success message is displayed.
If you did not change the Layer (L2) IP address to be different from the
APC Gateway IP address, the system displays an error message.
To Next Page
Loading...
