160
3300 ICP Technician’s Handbook
MXe and MXe Server
Identifying the Components
Figure 27, below, shows the MXe II controller without a PATA RAID
controller or APC-MXe board installed.
Figure 27: MXe II Controller with Top Cover Removed
Figure 28, below, shows the MXe III controller without a SATA RAID
controller installed.
CAUTION: To prevent ESD damage to the equipment:
(1) Ensure that the system is grounded before you install a
card.
(2) Whenever you handle cards, wear an anti-static strap
(attached to the cabinet).
(3) When removing cards from the cabinet, immediately place
them in an anti-static bag.
To Next Page