Mitel 6873i - Do Not Disturb (DND) Key

Mitel 6873i SIP Phone Release 4.2.0 SP2 User Guide
106
DO NOT DISTURB (DND) KEY
The IP phones have a feature you can enable called Do Not Disturb (DND). Configuring a DND
softkey allows you to quickly turn the DND feature on or off.
If DND is enabled, callers calling into the phone hear a busy signal or a message, depending
on how your System Administrator set up the configuration server. When DND is enabled, the
icon is displayed on screen in both the status bar and beside the corresponding softkey.
If the phone shares a line with other phones, only the phone that has DND configured is affected.
For more information about DND and DND modes, see “DND Configuration” on page 200.
CONFIGURING A DND KEY USING THE MITEL WEB UI
1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 48 on the Top keys.
or
Select from Key 1 through Key 30 on the Bottom keys.
3. In the Type field, select Do Not Disturb to apply to the key.
4. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this
softkey.
Expansion Module Keys
5. Select from Key 1 through Key 16 (M680i) or Key 84 (M685i).
6. In the Type field, select Do Not Disturb to apply to the key.
7. Click Save Settings.
MITEL WEB UI