Welcome
7
PHONE FEATURES
• 7" WVGA (800x480) color TFT capacitive touch LCD
• Built-in-two-port, 10/100/1000 Gigabit Ethernet switch - lets you share a connection with
your computer
• USB 2.0 port (500mA maximum)
• 48 top and 30 bottom softkeys
• Press-and-hold speeddial key configuration feature
• Supports 2 hard line keys with LEDs (additional line keys programmable via softkeys)
• Wideband handset
• Wideband, full-duplex speakerphone for handsfree calls
• USB and Bluetooth headset support
• AC power adapter (sold separately)
• Enhanced busy lamp fields*
• Set paging*
*Availability of feature dependent on your phone system or service provider.
REQUIREMENTS
The 6873i requires the following environment:
• SIP-based IP PBX system or network installed and running with a SIP account created for
the 6873i phone
• Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext
Transfer Protocol (HTTP) server, or Hyper Text Transfer Protocol over Secure Sockets
Layer (SSL) (HTTPS)
• Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN [1000 Mbps] recommended)
• Category 5/5e straight-through cabling (Category 6 straight-through cabling required for
optimum Gigabit Ethernet performance)
• Power source:
• For Ethernet networks that supply inline power to the phone (IEEE 802.3af or IEEE
802.3at [IEEE 802.3at recommended]) use an Ethernet cable to connect from the
phone directly to the network for power (no 48V AC power adapter required if using
Power-over-Ethernet [PoE] or PoE plus)
• For Ethernet networks that DO NOT supply power to the phone:
• Use only the GlobTek Inc. Limited Power Source [LPS] adapter model no.
GT-41080-1848 (sold separately) to connect from the DC power port on the phone
to a power source
or
• Use a PoE power injector or a PoE switch (PoE plus recommended)
To Next Page
Loading...
