Mitel 6873i - State-Based Softkeys

Mitel 6873i SIP Phone Release 4.2.0 SP2 User Guide
96
STATE-BASED SOFTKEYS
On the 6873i’s bottom softkeys, you can configure a specific state to display when a softkey is
being used. The following table describes the states available to configure for the softkeys.
The following table identifies the applicable default states for each softkey type on the IP phone.
STATE DESCRIPTION
Idle The phone is not being used.
Connected The current line is in an active call (or the call is on hold).
Incoming The phone is ringing.
Outgoing The user is dialing a number, or the far-end is ringing.
Busy The current line is busy because the line is in use or the line is set as DND.
SOFTKEY TYPE DEFAULT STATES
None All states disabled.
Speed Dial Idle, Connected, Incoming, Outgoing, Busy
DND Idle, Connected, Incoming, Outgoing, Busy
XML Idle, Connected, Incoming, Outgoing, Busy
Flash All states disabled.
Sprecode Connected
Park Connected
Pickup Idle, Outgoing
Last Call Return Idle, Connected, Incoming, Outgoing, Busy
Call Forward Idle, Connected, Incoming, Outgoing, Busy
Speed Dial/Xfer Idle, Connected, Incoming, Outgoing, Busy
Speed Dial/Conf Idle, Connected, Incoming, Outgoing, Busy
Speed Dial/MWI Idle, Connected, Incoming, Outgoing, Busy
Directory Idle, Connected, Incoming, Outgoing, Busy
Filter Idle, Connected, Incoming, Outgoing, Busy
Received Callers List Idle, Connected, Incoming, Outgoing, Busy
Outgoing Redial Idle, Connected, Incoming, Outgoing, Busy
Conference Idle, Connected, Incoming, Outgoing, Busy
Transfer Idle, Connected, Incoming, Outgoing, Busy
Intercom Idle, Connected, Incoming, Outgoing, Busy
Phone Lock All states disabled.
Paging All states disabled.
Login Idle, Connected, Incoming, Outgoing, Busy
Discreet Ringing Idle, Connected, Incoming, Outgoing, Busy
Call History Idle, Connected, Incoming, Outgoing, Busy