Mitel 6873i - Using Handsfree Speakerphone

Mitel 6873i SIP Phone Release 4.2.0 SP2 User Guide
150
With the phone in an idle state and on-hook, simply use the dialpad to enter the number you
wish to call, and after reviewing the number, press the Dial softkey. Use the Backspace softkey
to correct any errors and the Pause softkey to insert pauses.
USING HANDSFREE SPEAKERPHONE
The handsfree feature allows you to speak to someone without using the handset or headset.
Your phone must be in either the Speaker or Speaker/Headset audio mode. For more
information about setting the audio mode on your phone, see “Audio Mode” on page 77.
• To dial using handsfree, first press and enter a number at the dial tone.
• To answer a call on your phone using handsfree, press or the line/call appearance
button.
• If you are in Speaker audio mode, lift the handset and press to switch between
handsfree and handset.
• If you are in Speaker/Headset audio mode, press to switch between handsfree
and headset.
• When the handset is on hook, press to disconnect the call.
IP PHONE UI
Note: When handsfree is on, the speaker light turns on.