Configuring Softkeys
133
9. In the Label field, enter a label to apply to this key. When messages are pending, the phone
UI will display the number of pending messages and the defined label.
10. In the Value field, enter call URI and voicemail URI separated by a semi-colon, as per the
following syntax: [call URI];[voicemail URI]. For example,
+33123456,,,3456#0000#@domain;sip:voicemail_peter@domain.
11. In the Line field, select the line for which you want to use the key functionality.
Valid values are:
• global
• 1 through 24
12. Click Save Settings.
DIRECTORY KEY
Using the Mitel Web UI, you can assign the Directory key to any key on the top or bottom
softkeys on the phone. The Directory feature allows you to view Directory entries from multiple
sources and store frequently used names and numbers on the phone. You can also dial directly
from a Directory entry.
In addition to creating a Directory key, you can also download a Directory to your PC, if required,
using the Mitel Web UI.
Notes:
1. As the example above illustrates, pauses and DTMF are supported for the call
URI.
2. Ensure that no spaces are added between the call URI and the voicemail URI
when defining the key value.
3. If only one URI is provided, the value will be used for the voicemail URI and the
call URI will be left as undefined.
Note: For more information about the Directory, see “Directory” on page 176.
To Next Page
Loading...
