Mitel 6873i - Page 86

Mitel 6873i SIP Phone Release 4.2.0 SP2 User Guide
84
5. Select a value from the Line N field.
6. Click Save Settings.
Installing Custom Ring Tones Using the Mitel Web UI
1. Click on Basic Settings > Custom Ringtones
2. Press the Browse... button corresponding to the desired ringtone position (e.g. 1).
3. Navigate to the folder containing the WAV file you want to upload, select the file using your
left mouse button, and press the Open button.
The filename should now be displayed to the right of the respective Browse... button.
4. Press the Upload button to upload the file to the phone.
5. Repeat Steps 2 to 4 to upload additional WAV files to the phone.
Note: See the “Ring Tones” on page 80 for valid values.
Notes:
1. Access to the Custom Ringtones Web UI menu is only available if enabled by your
System Administrator.
2. Ringtones must be in .wav format. The IP phones support the following WAV file
specifications:
• G.711 μ-law and a-law Codec
• 20 ms packet size
• Mono 8KHz
3. Individual WAV files cannot exceed 1 MB in size (the total combined size of the eight
WAV files cannot exceed 8 MB).
4. Filenames must contain only ASCII characters.
MITEL WEB UI
Note: Press the Delete button to delete the desired ringtone from your phone.