Mitel MiVoice 5000 - Unlocking the terminal; The Do Not Disturb function

Configuration options
53
2 - Select Lock and press Select to confirm.
Note: the request is immediately taken into account.
-> The idle screen displays the message "Tel. locked".
The terminal is locked, but you can call an internal
correspondent.
Remarque : To lock your terminal, you must first enter a personal
password, for it will be required to unlock it (Voir “Changing the
subscription password”, page 55).
Via feature code: * 0 5
Unlocking the terminal*
1 - Press Menu.
• Enter your subscription password (4 characters) then press OK
to confirm.
-> The terminal is unlocked.
Via feature code: # 0 5 + password
The Do Not Disturb function
*
When this function is active, the terminal no longer receives any calls.
1 - Select Settings then Calls.
2 - From the list, select Do Not Disturb then press Select to
confirm.
-> The request is accepted and, on the list, the option is
preceded by an asterisk.
Remarque : The idle screen displays a terminal status message.
To start receiving calls again on your terminal, on the list, just
select the function then click Select to confirm.
You can also delete the function by accessing the active functions
(Menu > Active functions).
Via feature code:
Enabled: * 4 5
Disable: # 4 5
Lock
Menu
* Selon programmation effectuée par l’exploitant système
Do not disturb