Mitel MiVoice 5000 - Standby mode; Deactivating a hunt group; Remote forwarding

Configuration options
54
Standby mode*
You wish to step out whereas some colleagues have activated call forwarding or filtering
to your terminal. This function allows these calls to be temporarily forwarded to the owners
so callers are not penalised. If you are part of a hunt group, your terminal will be excluded
from this.
1 - Select Settings then Calls.
2 - Select General standby then press Select to confirm.
A message on the screen confirms the activation of this function.
You only receive your own calls.
You can cancel the function for the same operation.
You can also cancel the function by accessing the active
functions (Menu Active functions).
Deactivating a hunt group
*
Your terminal is part of a call group and you wish to temporarily
remove this terminal from the group.
1 - Select Settings then Calls.
2 - Select Deac. group then press Select to confirm.
You can return to the group using this same procedure. You can
also do so by accessing the active functions (Menu > Active
functions).
Via feature code:
Enabled: * 4 8
Disable: # 4 8
Remote forwarding
*
From your terminal, you have the possibility to forward calls from
another terminal to your terminal.
1 - Select Settings then Calls.
1 - Select Remote forwarding.
2 - Enter the number of the terminal whose calls must be
forwarded to your terminal.
3 - Click OK to confirm.
General standby
Deact. Group
* Selon programmation effectuée par l’exploitant système
Remote forwardin