Mitsubishi Electric MELSEC-A/QnA Series - Page 153

4 TEMPERATURE INPUT MODULE REPLACEMENT
4 - 10
Q64TD
Address
(hex)
Name Read/write
58 CH1 Warning output upper/lower limit value
R/W
59 CH1 Warning output upper/upper limit value
5A CH2 Warning output lower/lower limit value
5B CH2 Warning output lower/upper limit value
5C CH2 Warning output upper/lower limit value
5D CH2 Warning output upper/upper limit value
5E CH3 Warning output lower/lower limit value
5F CH3 Warning output lower/upper limit value
60 CH3 Warning output upper/lower limit value
61 CH3 Warning output upper/upper limit value
62 CH4 Warning output lower/lower limit value
63 CH4 Warning output lower/upper limit value
64 CH4 Warning output upper/lower limit value
65 CH4 Warning output upper/upper limit value
66 to 75 System area (Not used) -
76 CH1 Offset temperature setting value
R/W
77 CH1 Gain temperature setting value
78 CH2 Offset temperature setting value
79 CH2 Gain temperature setting value
7A CH3 Offset temperature setting value
7B CH3 Gain temperature setting value
7C CH4 Offset temperature setting value
7D CH4 Gain temperature setting value
7E to 9D System area (Not used) -
9E to 9F Mode switching setting
R/W
A0 CH1 Factory default offset value
A1 CH1 Factory default gain value
A2 CH1 User range settings offset value
A3 CH1 User range settings gain value
A4 CH1 User range settings thermal (L)
EMF offset value (H)
A5
A6 CH1 User range settings thermal (L)
EMF gain value (H)
A7
A8 CH2 Factory default offset value
A9 CH2 Factory default gain value
AA CH2 User range settings offset value
AB CH2 User range settings gain value
AC CH2 User range settings thermal (L)
EMF offset value (H)
AD
AE CH2 User range settings thermal (L)
EMF gain value (H)
AF
B0 CH3 Factory default offset value
B1 CH3 Factory default gain value