3 ANALOG OUTPUT MODULE REPLACEMENT
3 - 21
Item A62DA
Isolation method
Between the output terminal and programmable controller power supply: photocoupler isolation
(Between channels: non-isolation)
Dielectric withstand voltage -
Insulation resistance -
Number of occupied I/O points
32 points
(I/O assignment: special 32 points)
Connected terminal 20-point terminal block
Applicable wire size
0.75 to 2mm
2
(Applicable tightening torque: 39 to 59N•cm)
Applicable solderless terminal V1.25-3, V1.25-YS3A, V2-S3, V2-YS3A
Internal current consumption
(5VDC)
0.6A
External
power supply
Voltage 21.6 to 26.4VDC
Current
consumption
0.35A
Inrush current 2.4A
Weight 0.5kg
To Next Page
Loading...
