134
6 RAS FUNCTIONS
6.3 Error Clear
When the write protect switch of the SD memory card is enabled, an error of the memory card access error,
which is generated when an event history is held, can be cleared. Note that an error will not be detected again
even if the event history is stored due the occurrence of event after resetting an error.
Receive queue full 1830H
Receive processing error 1831H
Transient data error 1832H
Constant scan time error 1900H
Network configuration mismatch 1B00H
System consistency check error (operating status) 1B20H
Redundant system error 1B40H, 1B42H, 1B43H
Standby system CPU module error 1B60H, 1B61H
Tracking communications disabled 1B70H
Tracking communication error 1B71H, 1B78H
Tracking transfer error 1B80H, 1B81H, 1B82H
Redundant function module error 1BA0H
System switching error 1BD0H
Memory card error 2120H, 2121H
Module verification error 2400H, 2401H
Fuse blown error 2420H
Module major error 2441H, 2442H, 2450H
Another CPU module major error 2461H, 2462H, 2470H
Inter-module synchronization signal error 2610H
Multiple CPU synchronization signal error 2630H
I/O number or network number specification error 2800H, 2801H, 2802H, 2803H, 2804H, 2805H, 2806H, 2807H, 2810H
Device, label, or buffer memory specification error 2820H, 2821H, 2822H, 2823H, 2824H
File name specification error 2840H, 2841H, 2842H
Operation error 3400H, 3401H, 3402H, 3403H, 3404H, 3405H, 3406H, 3420H, 3421H,
3422H, 3423H, 34A0H
Error name Error code
To Next Page
Loading...
