194
11 DATA LOGGING FUNCTION
11.8 Data Logging File Transfer (Auto Transfer to FTP Server)
11.8 Data Logging File Transfer (Auto Transfer to FTP
Server)
This function automatically transfers data logging files to the FTP server.
An SD memory card as the temporary storage destination is not required by setting the CPU built-in memory (function
memory
*1
) as the data storage destination while using this function.
*1 For the CPU modules that can use the function memory, refer to the availability of storage location. ( Page 183 Availability)
Before executing the function, check the versions of the CPU module and CPU Module Logging Configuration
Tool used. ( Page 1008 Added and Enhanced Functions)
An FTP server is required for the data logging file transfer function. For details on the server, refer to the
manual for the server used.
The operation of this function is checked with the following FTP server.
• This function cannot be used in the R00CPU.
Item Supported operating system
FTP server whose operation is checked by Mitsubishi Microsoft
Internet Infomation Services(IIS)
The supported operating systems are as follows:
•Microsoft
Windows
10
•Microsoft
Windows
8.1
•Microsoft
Windows
8
•Microsoft
Windows
7
RnCPU
RnENCPU
RnPSFCPU RnPSFCPU
RnSFCPU RnSFCPURnPCPURnPCPU
(Standard) (Safety) (Standard) (Safety)
(Redundant)
(Process)
LOG02_
00000001
.txt
LOG01_
00000001
.txt
LOG03_
00000001
.txt
LOG01_
00000001
.txt
LOG02_
00000001
.txt
LOG03_
00000001
.txt
CPU module
FTP server
Data logging
file
CPU module
Data logging
file
CPU module
Data logging
file
Ethernet
To Next Page
Loading...
